ISO 9001
Protective
coatings
coatings
ANTICORROSION COATINGS
8-800-500-54-00
CALL IN RUSSIA FREE
CALL IN RUSSIA FREE
| REPRESENTATIVE OFFICE IN YOUR REGION |
| VMP Holding JSC |
| Ekaterinburg, 25 Tkachey str., tel.: +7 343 357-30-97, +7 343 357-30-79 e-mail: office@fmp.ru |
| VMP in social networks: | |
|
|
QUICK-DRYING
MATERIAL
MATERIAL
ATMOSPHERE-RESISTANT
MATERIAL
MATERIAL
HEAT-RESISTANT
MATERIAL
MATERIAL
THICK-LAYERED
MATERIAL
MATERIAL
FOR APPLICATION AT
NEGATIVE
TEMPERATURE
NEGATIVE
TEMPERATURE
SINGLE-PACKED
MATERIAL
MATERIAL
ST 2, ST 3 SURFACE
PREPARATION DEGREE
PREPARATION DEGREE
FOR USE AT
SEA AND FRESH
WATER
SEA AND FRESH
WATER
FOR USE WHEN
EXPOSED TO OIL
AND OIL PRODUCTS
EXPOSED TO OIL
AND OIL PRODUCTS
ZINC-FILLED
MATERIAL
MATERIAL
MATERIAL WITH
ANTICORROSIVE
PIGMENTS
ANTICORROSIVE
PIGMENTS
MATERIAL WITH
CORROSION INHIBITOR
CORROSION INHIBITOR
MATERIAL WITH
ANTISTATIC PROPERTIES
ANTISTATIC PROPERTIES
Abrasive-blast clean
Abrasive-blast clean is the most effective way to prepare the surface before painting. During abrasive-blast cleaning, the structure surface is fully cleaned from contaminations and old paints, and the required roughness is created for better coating-metal adherence.
Many VMP anticorrosive materials should be applied on metal or concrete surface prepared, exactly, by abrasive-blast clean up to 1 or 2 degree under GOST 9.402-2004 (Sa 2 1/2 or Sa 2 under ISO 8501-1:2007).
Such surface preparation ensures long working life of the coating.
If abrasive-blast clean is impossible or inappropriate, mechanical or hand clean shall be applied.
The VMP Holding specialists can offer you a professional service to choose the coating system:
+ 7 343 357-30-97, 8-800-500-54-00, On-line request.
+ 7 343 357-30-97, 8-800-500-54-00, On-line request.
Catalogue. Materials for abrasive-blast-cleaned surface
| Название материала | Описание |
|---|---|
| VINICOR-acryl-51 | Primer-enamel |
| VINICOR primer-enamel |
Primer-enamel epoxy-vinyl |
| VINICOR-061 | Epoxy-vinyl primer |
| VINICOR®-marine primer | Epoxy primer |
| VINIСOR-nord | Vinyl-polyester primer-ename |
| VINICOR-ecoprime | Epoxy primer-enamel |
| VINICOR-ecoprime-01 | Epoxy primer |
| VINICOR EP-5285 | Polyamine cured epoxy enamel. |
| VINICOR BEP-5297 | Epoxy enamel |
| VINICOR EP-1155 D | Epoxy enamel |
| VINICOR-term | Heat resistant coating |
| ISOLEP-mastic | Primer-enamel |
| ISOLEP-hydro |
Primer-enamel |
| ISOLEP-termo | Primer epoxy phenolic |
| ISOLEP®-SP-03 | shopprimer |
| ISOLEP®-pro | penetrating primer |
| ISOLEP-primer | Primer anticorrosive coating |
| ISOLEP-oil | Composition |
| ISOLEP®-arctic | primer/finish |
| ISOLEP®-235 | primer/finish |
| ISOLEP®-epoline | composition |
| POLYTON®-ZP |
Primer-enamel |
| ZINEP 80 | anticorrosive zinc-rich primer |
| ZINEP | Anticorrosive zinc-rich primer |
| ZINOTERM | Anticorrosive zinc-rich heatproof composition |
| ZINOTAN | Anticorrosive zinc-rich composition |
| ZINOL-SV | Anticorrosive zinc-rich composition |
| ZFES®-MO | ethylsilicate zinc-rich shop-primer |
| ZFES | Anticorrosive zinc-rich composition |
ISO 9001
We use cookies on our website, IP-address and geolocation data are used for collection of technical information according to personal data processing policy.
| VMP in social networks: |
|
|