REPRESENTATIVE OFFICE
IN YOUR REGION
VMP Holding JSC
Ekaterinburg,
25 Tkachey str.,

tel.: +7 343 357-30-97,
+7 343 357-30-79
e-mail: office@fmp.ru



VMP in social networks:

QUICK-DRYING
MATERIAL
ATMOSPHERE-RESISTANT
MATERIAL
HEAT-RESISTANT
MATERIAL
THICK-LAYERED
MATERIAL
FOR APPLICATION AT
NEGATIVE
TEMPERATURE
SINGLE-PACKED
MATERIAL
ST 2, ST 3 SURFACE
PREPARATION DEGREE
FOR USE AT
SEA AND FRESH
WATER
FOR USE WHEN
EXPOSED TO OIL
AND OIL PRODUCTS
ZINC-FILLED
MATERIAL
MATERIAL WITH
ANTICORROSIVE
PIGMENTS
MATERIAL WITH
CORROSION INHIBITOR
MATERIAL WITH
ANTISTATIC PROPERTIES
MainAnticorrosive protectionAnticorrosive materialsAbrasive-blast clean

Abrasive-blast clean

Abrasive-blast clean is the most effective way to prepare the surface before painting. During abrasive-blast cleaning, the structure surface is fully cleaned from contaminations and old paints, and the required roughness is created for better coating-metal adherence.

Many VMP anticorrosive materials should be applied on metal or concrete surface prepared, exactly, by abrasive-blast clean up to 1 or 2 degree under GOST 9.402-2004 (Sa 2 1/2 or Sa 2 under ISO 8501-1:2007).

Such surface preparation ensures long working life of the coating.

If abrasive-blast clean is impossible or inappropriate, mechanical or hand clean shall be applied.

The VMP Holding specialists can offer you a professional service to choose the coating system:
+ 7 343 357-30-97, 8-800-500-54-00, On-line request.

Catalogue. Materials for abrasive-blast-cleaned surface

Табличный вид Вид плитки
Primer-enamel
Primer-enamel epoxy-vinyl
Epoxy-vinyl primer
Vinyl-polyester primer-ename
Epoxy primer-enamel
Epoxy primer
Polyamine cured epoxy enamel.
Epoxy enamel
Epoxy enamel
Primer-enamel
Primer-enamel
Primer anticorrosive coating
Composition
Primer-enamel
Anticorrosive zinc-rich primer
Anticorrosive zinc-rich heatproof composition
Anticorrosive zinc-rich composition
Anticorrosive zinc-rich composition
ethylsilicate zinc-rich shop-primer
Anticorrosive zinc-rich composition