Metallurgical industry
Metallurgical production is a complex, multi-step high-tech process. Hard production conditions are characterized by the presence of aggressive media and a variety of temperature modes. A combination of these factors requires the use of modern effective solution for the protection of structures. In the metallurgic complex VMP coating are used at a wide range of facilities from mining and processing integrated plants to enterprises producing rolled products. The holding provides a range of services at all stages of cooperation and over the period of operation has proved itself as a trusted and reliable manufacturer of high-tech materials.
VMP coatings scope of application
-
Protection against corrosion of metal structures of buildings, shops, clear pathways and galleries indoors, in the open atmosphere and in contact with corrosive media.
-
Corrosion protection of process equipment, including heated ones (permanently up to 350оС / short-term up to 400оС) indoors, in the open atmosphere and in contact with corrosive media
-
Corrosion protection of concrete and reinforced concrete indoors and in the open atmosphere
-
Corrosion protection of infrastructure facilities in the open environment in the ground, at increased temperatures
Industrial certification
VMP materials are approved and recommended for use by State Committee for Construction of Russia.
VMP anticorrosive coatings have been successfully tested and have the conclusions of leading industrial institutes and research centers: Research Institute of Concrete and Reinforced Concrete (NIIZHB), LKM-KHOTKOVO-TEST, Central Research and Design Institute of Building Metal Structures (TsNIIPSK) named after Melnikov, Moscow State Construction University, Institute for Corrosion Protection (Germany), POZH-AUDIT STS Testing Center.
VMP anticorrosive coatings comply with the requirements of international standard ISO 12944, SP 28.13330.2012 (revised edition SNiP 2.03.11-85 “Protection of building structures against corrosion”), diagnostic center of Polar Branch of PAO MMC Norilsk Nickel, GOST 31384-2017 “Protection of concrete and reinforced concrete structures against corrosion. General technical requirements”
Advantages of VMP anticorrosive coatings
- long service life (up to 30 years)
- resistance in an industrial atmosphere with corrosive activity C3, C4, C5, CХ and various media (atmosphere, water, soil)
- off-season on-site and factory application
- suitable for any climatic conditions
- high protective-decorative performance
"Industrial and civil engineering” Directorate
Telephone: +7 (343) 357-30-11, +7 (343) 357-30-97 (add. 173)
e-mail: stepantsov@fmp.ru
Standard systems for anticorrosive protection of structures operated indoors and in an open atmosphere
Equipment protection
Coating systems based on heat-resistant organosilicone material (ZINOTERM, ALUMOTERM, VINICOR-term). They withstand constant temperature impact up to + 350 оС, short-term – up to + 400 оС. In this case, the coating ensures the protection of equipment against corrosion while preserving its decorative characteristics.
Experts of VMP Holding can provide you with qualified assistance in selecting the coating system.
You can call us by phone +7 (343) 357-30-97, or contact us by clicking the button below. You can also find out, how to distinguish counterfeit products from original ones.
