VINICOR® EP-1155
- Varnish
- Color: colorless
- Package: Two-pack
FIND OUT THE PRICE PRODUCT AUTHENTICITY CHECKING
Beware of fakes! The original VMP container is a tin conical jar (euro jar) with a “Crown” lid. Image application method – tin lithography, label – self-adhesive paper. Exceptions are: ZFES and ZFES-MO (binder is supplied in plastic canisters); ALISTERUS 3105, SOLV-UR, SOLV-EP, SOLV-ES, SOLVIN (metal barrel or plastic canister). Other containers indicate counterfeit origin of the products! In case of any doubts about the authenticity of the purchased products, contact the VMP Holding: office@fmp.ru, 8 (800) 500-54-00
DESCRIPTION
Two-pack varnish based on epoxy resin and polyamide hardener.
PURPOSE AND AREA OF APPLICATION
It is designed for strengthening the anti-corrosion protection (insulation) of metal structures for various purposes at nuclear power and industrial facilities.The coating system consisting of VINICOR EP-1155D enamel and VINICOR EP-1155 varnish is decontaminable. It is used in the nuclear power industry, chemical industry, warehouses and utility rooms, personal service facilities, medical, sports and retail facilities.
It is used as:
- a top coat in complex coating systems with VINICOR® EP-1155D enamel and impregnation primer based on VINICOR® EP-1155D enamel and EP-5285 enamel;
- an independent coating.
CERTIFICATION, TESTS
State registration certificate No. RU.77.01.34.008.Е.000827.04.18 dated April 11th, 2018.
Nuclear industry: complies with the requirements of GOST R 51102 “Decontaminable protective polymeric coatings”, decisions of the Federal State Unitary Enterprise A.P. Alexandrov Research Institute of Technology, N.A. Dollezhal Power Engineering Research and Design Institute.
Approved by test centers: NII LKP with OMZ Victoria.
SURFACE PREPARATION
The coating of the underlying layer must be cleaned of dirt, degreased, if necessary, and free from dust and moisture.
PACKAGING AND STORAGE
The materials should be delivered as a set: the base and hardener packed in metal buckets and cans, respectively, depending on the weight.Storage conditions in accordance with GOST 9980.5 (at ambient temperatures from minus 40 to plus 40 °С). The container with material components must not be stored near hear sources and exposed to precipitation and direct sunlight.
Guaranteed storage life of the hardener: 12 months from the date of manufacture.
SAFETY MEASURES
When working, one shall observe the corresponding industrial standards and requirements and safety measures indicated on the container label.
Use personal protective equipment (goggles, masks, respirators), avoid inhalation of thinners during evaporation and contact of the material or its components with skin, eye and respiratory ways mucous membrane; use the material indoors only with sufficient ventilation.
The material and its components (the base and hardener) are flammable!
Compatible materials
Beware of fakes!
The original VMP container is a tin conical jar (euro jar) with a “Crown” lid. Image application method – tin lithography, label – self-adhesive paper. Exceptions are: ZFES and ZFES-MO (binder is supplied in plastic canisters); ALISTERUS 3105, SOLV-UR, SOLV-EP, SOLV-ES, SOLVIN (metal barrel or plastic canister). Other containers indicate counterfeit origin of the products! In case of any doubts about the authenticity of the purchased products, contact the VMP Holding: office@fmp.ru, 8 (800) 500-54-00
how to distinguish signs of counterfeit productsExperts of VMP Holding can provide you with qualified assistance in selecting the coating system.
You can call us by phone +7 (343) 357-30-97, or contact us by clicking the button below. You can also find out, how to distinguish counterfeit products from original ones.