SOLVIN®
- Thinners
- Color: Colorless or light yellow
- Package:
FIND OUT THE PRICE PRODUCT AUTHENTICITY CHECKING
Beware of fakes! The original VMP container is a tin conical jar (euro jar) with a “Crown” lid. Image application method – tin lithography, label – self-adhesive paper. Exceptions are: ZFES and ZFES-MO (binder is supplied in plastic canisters); ALISTERUS 3105, SOLV-UR, SOLV-EP, SOLV-ES, SOLVIN (metal barrel or plastic canister). Other containers indicate counterfeit origin of the products! In case of any doubts about the authenticity of the purchased products, contact the VMP Holding: office@fmp.ru, 8 (800) 500-54-00
Description
The thinners are a hydrocarbon volatile organic liquid mixture.
Produced marks: SOLVIN-10, SOLVIN-11, SOLVIN-12, SOLVIN-13, SOLVIN-14, SOLVIN-15.
Recommended use
The thinners are used to dilute and clean the equipment, when the VMP materials are applied.
SOLVIN-10 – VINICOR-061 primer, VINICOR-62 enamel, VINICOR-63 varnish, VINICOR primer-enamel and for other vinyl-epoxy and epoxy materials, to degrease metal surfaces;
SOLVIN-11 – VINICOR-nord primer-enamel and other vinyl-polyester materials, to degrease metal surfaces;
SOLVIN-12 – VINICOR-marine series, VINICOR-ecoprime series, NEFTECOR series, VINICOR EP-1155 D enamel and other epoxy materials, to degrease metal surfaces;
SOLVIN-13 – VINICOR BEP-5297 enamel;
SOLVIN-14 – VINICOR EP-1155D and other epoxy materials;
SOLVIN-15 – VINICOR EP-1155D enamel, VINICOR-acryl primer-enamel, VINICOR-74 varnish, VINICOR-85 varnish and other epoxy and acryl materials.
Technical data
Thinner Density, g/cm3SOLVIN-10 0,845-0,850
SOLVIN-11 0,840-0,860
SOLVIN-12 0,830-0,850
SOLVIN-13 0,800-0,816
SOLVIN-14 0,864-0,867
SOLVIN-15 0,878-0,880
Storage and handling
The thinner is delivered in metal drums, metal buckets, plastic and metal cans.
Storage conditions of the thinner – according to GOST 9980.5-2009 (at air temperature from minus 40 to plus 40 °C). The container with the thinner shall be protected from atmospheric condensation and direct sunlight.
The shelf life of the thinner in hermetically enclosed original containers is 24 months starting with the manufacture date.
Precautions
When working, one shall observe the existing sectoral standard norms and requirements and safety measures as specified on the package label.
One shall use personal protective equipment (goggles, face masks and respirators), avoid inhalation of thinners and contact of the material or its components with skin, eye mucosa, respiratory channels; use inside the premises is allowed only in case sufficient ventilation is provided.
The thinner is a fire-hazardous material.
The information is of general character, without consideration to the object specific nature. Use of materials for other purposes not specified here or in case other influencing factors are present shall be approved by the VMP Holding CJSC in writing. In case of absence of such approval the manufacturer is not held liable for the improper use of the material and the buyer falls from the right to present claims connected with the coating quality
Beware of fakes!
The original VMP container is a tin conical jar (euro jar) with a “Crown” lid. Image application method – tin lithography, label – self-adhesive paper. Exceptions are: ZFES and ZFES-MO (binder is supplied in plastic canisters); ALISTERUS 3105, SOLV-UR, SOLV-EP, SOLV-ES, SOLVIN (metal barrel or plastic canister). Other containers indicate counterfeit origin of the products! In case of any doubts about the authenticity of the purchased products, contact the VMP Holding: office@fmp.ru, 8 (800) 500-54-00
how to distinguish signs of counterfeit productsExperts of VMP Holding can provide you with qualified assistance in selecting the coating system.
You can call us by phone +7 (343) 357-30-97, +7 (343) 385-79-00, or contact us by clicking the button below. You can also find out, how to distinguish counterfeit products from original ones.