REPRESENTATIVE OFFICE
IN YOUR REGION
VMP Holding JSC
Ekaterinburg,
25 Tkachey str.,

tel.: +7 343 357-30-97,
+7 343 357-30-79
e-mail: office@fmp.ru



VMP in social networks:

QUICK-DRYING
MATERIAL
ATMOSPHERE-RESISTANT
MATERIAL
HEAT-RESISTANT
MATERIAL
THICK-LAYERED
MATERIAL
FOR APPLICATION AT
NEGATIVE
TEMPERATURE
SINGLE-PACKED
MATERIAL
ST 2, ST 3 SURFACE
PREPARATION DEGREE
FOR USE AT
SEA AND FRESH
WATER
FOR USE WHEN
EXPOSED TO OIL
AND OIL PRODUCTS
ZINC-FILLED
MATERIAL
MATERIAL WITH
ANTICORROSIVE
PIGMENTS
MATERIAL WITH
CORROSION INHIBITOR
MATERIAL WITH
ANTISTATIC PROPERTIES
MainAnticorrosive protectionAnticorrosive materialsBY MATERIALPrimer-enamelsALISTERUS 3105 primer-enamel

ALISTERUS 3105 primer-enamel

ALISTERUS-3105
ТU 20.30.11-012-69044442-2020
Primer-enamel
Single-component
Colour: gray, possible color matching according to the color maps RAL, NOVA, NCS, SYMPHONE

Description

ALISTERUS 3105 is protective primer-enamel for concrete based on an aqueous acrylic copolymer with the functional additives, pigments and fillers.

Recommended use

Protection of internal and external surfaces of buildings and structures made of mineral materials (concrete, plaster, natural stone, brick), used in the atmospheric environment of all macroclimatic areas, types of atmosphere and placement categories in accordance with GOST 15150-69. It is used as an independent coating and the main protective coating in the comprehensive systems with the anti-graffiti varnish Alisterus 1702 produced by Alisterus LLC.

Certificates, Approvals

It is approved by the test center of Research Institute of Transport Construction JSC (TsNIIS JSC).

Surface preparation

The concrete surface prepared for painting should be uniformly rough and have no protruding reinforcement, serious defects, such as cracks, potholes, voids, sagging, chipped edges, oil stains, dirt and dust.

Operation procedure:

  • removal of dirt, oil and grease contaminations;
  • removal of lime milk (laitance), destroyed or flaking concrete layers and previous coatings by abrasive blasting, grinder or brushes, high pressure water rinsing;
  • dedusting;
  • repair of cracks and chips.

The holding time of the concrete base after the concrete placement and prior to the primer application should be at least 28 days; after the leveling compound application - according to the regulatory documents of the compound manufacturer.

Application

Stir the primer-enamel thoroughly before use to the homogenous condition. If necessary, dilute the primer-enamel with drinking water to the working viscosity immediately before application.

It is recommended to apply the primer-enamel at the temperatures from +5 to +30°C and relative humidity from 30 to 80%. It is prohibited to apply the coating on the frozen or damp surface, in the case of strong winds and atmospheric precipitation.

Storage and handling

The primer-enamel is supplied in the plastic buckets with a capacity of 20 l and 10 l. It is recommended to store in a tightly closed and sealed container without exposure to air and moisture, in the closed warehouse at an ambient temperature from +5°C to +25°C. During storage, the container shall not be exposed to atmospheric precipitation and direct sunlight.

The guaranteed shelf life of the varnish in a tightly close and sealed manufacturer's container should be 12 months from the date of manufacture.

Precautions

When working with the primer-enamel, it is necessary to comply with the relevant industry codes and requirements, as well as the precautions indicated on the container label.

It is necessary to use personal protective equipment (goggles, masks, breathing masks), avoid inhalation of solvents during evaporation and contact of the compound with the skin, eye mucous membranes and respiratory tract; indoor use with adequate ventilation only.

The primer-enamel is the fireproof material.

.

You can order products and get advice of how to use materials by calling: 8-800-500-54-00, +7 343 357-30-97, 385-79-00 or by sending an On-line request

You can also purchase products from official representatives of the VMP in Russian regions, countries of near and far abroad.