ALISTERUS-1702

DESCRIPTION

ALISTERUS 1702 is panti-graffiti varnish with the silicone components.

RECOMMENDED USE

Anti-graffiti protection for mineral surfaces of the structures and buildings (concrete, plaster, natural stone, brick), operated in the atmospheric environment of all macroclimatic areas, types of atmosphere and placement categories in accordance with GOST 15150.

It is used as a top protective coating in complex systems of protective coatings for concrete and mineral surfaces with primer-enamel ALISTERUS 3105 manufactured by OOO Alisterus, as well as for other surfaces by prior agreement. It can be used as an independent coating for concrete.

CERTIFICATES, APPROVALS

Certificate of state registration No. RU.60.01.40.015.E.000003.01.21 dated 22.01.2021.

Transport construction: standard STO-01393674-008-2024 of Central Research Institute of Transport Construction

Recommended condition of the surface to be painted

Prior to the varnish application, the primer coating should be free of dirt, dust, moisture, ice and degreased.

APPLICATION

• Stir thoroughly before use to the homogenous condition;

• If necessary, dilute with the ALISTERUS 5001 solvent to the working viscosity immediately before application;

• It is recommended to apply ALISTERUS 1702 at the temperatures between +5 and +30 °C and relative humidity between 30 and 80 %;

• it is forbidden to use the material on frozen and damp substrates, also with condensation moisture. The temperature of the surface to be painted must be above the "dew point" at least 3°C.
  

STORAGE AND HANDLING

ALISTERUS 1702 is packed in metal buckets of 9 and 17 kg, or metal cans of 0.9 kg.

It is recommended to store in a tightly closed and sealed container without exposure to air and moisture, in the closed warehouse at an ambient temperature from +5 to +25°C. During storage, the container shall not be exposed to atmospheric precipitation and direct sunlight.

The guaranteed shelf life in a tightly close and sealed manufacturer's container should be 12 months from the date of manufacture. After opening the package, the varnish should be used within no more than 2 hours.

PRECAUTIONS

When working with the varnish, it is necessary to comply with the relevant industry codes and requirements, as well as the precautions indicated on the container label.

It is necessary to use personal protective equipment (goggles, masks, breathing masks), avoid inhalation of solvents during evaporation and contact of the compound with the skin, eye mucous membranes and respiratory tract; indoor use with adequate ventilation only. The varnish is the fire hazardous material.